Fa'alili afi Aramid Nomex Eletise AMA Composite Material
| Igoa o oloa: | Pepa Insulation AMA | Meafaitino: | Aramid + PET Ata |
| Lanu: | Lanu pa'epa'e | Vasega vevela： | Vasega H, 180℃ |
| Malosiaga dielectric： | ≥ 8 KV | Malosi (MD): | ≥ 200N/10mm |
| Fa'aaogāga fa'apisinisi: | Fa'aaogaina i le Transformer | amataga: | HangZhou Zhejiang |
| afifiina: | Tulaga Fa'asalalau Fa'asalalau | ||
AMA-Flexible Composite Material Composite Material AMA Insulation Pepa
Mea Fa'atasi |AMA |Pepa Insulation |AMA-Flexible Composite Material Composite |Eletise Insulation Mea
--Vaega Insulation: Vasega H (180 °C)
--Polyester film/Aramid Pepa fetuutuunai Laminate e maualuga mea dielectric, loimata malosi ma tensile malosi, lelei impregnation faatinoga
--As slot, interturn ma liner insulation mo afi E-grade, afi afi ma meafaigaluega eletise.O le ata polyester mo le eletise eletise o loʻo i ai tulaga maualuga o le dielectric, malosi loimata ma le malosi faʻamalosi, lelei le faʻatinoina o le impregnation.
--H grade AMA polyester film polyester fiber composite foil mo afi, eletise stator winding in the slot insulation, liner insulation ma liliu e liliu le insulation.
--H-vasega AMA Insulation Pepa o loʻo faʻaaogaina foi i le faʻamago-ituaiga transformer coil insulation layer, le faʻaiʻuga o le insulation, liner insulation.
| Nofoaga na Afua mai ai | Saina |
| Su'ega igoa | Taimi o HangZhou |
| Tusipasi | ISO9001, ROHS, REACH, UL |
| AMA-Flexible Composite Material | |
| Ole aofa'i ole oka la'ititi | 100 KGS |
| Tau(usd） | 12 ~ 24 / kilokalama faʻavae ile ituaiga AMA |
| Fa'amatalaga Fa'amau | Fa'apipi'i Fa'asalalau masani |
| Avanoa Avanoa | 10000 KGS / aso |
| Taulaga Tiliva | Shanghai / Ningbo |
| Lanu | Lanu pa'epa'e |
| Meafaitino | Pepa Aramid + PET Ata |
| Taimi e teu ai | 6 masina |
| Meatotino | Vaega | Taua | |||||||||||
| Igoa |
| AMA-H | |||||||||||
| Nominal mafiafia | mm | 0.11 | 0.12 | 0.14 | 0.15 | 0.18 | 0.20 | 0.25 | 0.28 | 0.30 | 0.35 | 0.40 | 0.45 |
| Onosa'i | mm | ±0.02 | ±0.02 | ±0.02 | ±0.02 | ±0.02 | ±0.03 | ±0.03 | ±0.03 | ±0.03 | ±0.035 | ±0.040 | ±0.045 |
| Fa'atasi | mil | 1.5-1-1.5 | 1.5-1.5-1.5 | 1.5-2-1.5 | 1.5-3-1.5 | 1.5-4-1.5 | 1.5-5-1.5 | 1.5-6-1.5 | 1.5-7-1.5 | 1.5-7.5-1.5 | 1.5-10-1.5 | 1.5-12-1.5 | 1.5-14-1.5 |
| Aofa'iga o mea | g/m2 | 117±12 | 132±13 | 152±15 | 187±19 | 221±22 | 256±26 | 291±29 | 345±35 | 376±37 | 431±43 | 501±50 | 571±57 |
| PET-ata tifaga | mm | 0.025 | 0.036 | 0.050 | 0.075 | 0.100 | 0.125 | 0.165 | 0.188 | 0.200 | 0.250 | 0.300 | 0.350 |
| Pepa Aramide | mm | 0.04 | |||||||||||
| Malosi fa'asa faaumiumi fa'asagatau | N/10mm N/10mm | ≥80 ≥70 | ≥90 ≥70 | ≥110 ≥85 | ≥130 ≥100 | ≥145 ≥115 | ≥200 ≥145 | ≥250 ≥225 | ≥260 ≥250 | ≥270 ≥255 | ≥320 ≥295 | ≥340 ≥335 | ≥390 ≥345 |
| Fa'aumiumi faaumiumi fa'asagatau | % | ≥10 | ≥15 | ≥20 | |||||||||
| ≥20 | ≥25 | ||||||||||||
| Malosiaga malepelepe | KV | ≥6 | ≥7 | ≥8 | ≥11 | ≥12 | ≥14 | ≥15 | ≥19 | ≥20 | ≥23 | ≥25 | ≥28 |
| Fa'atasi (tulaga masani) |
| Leai se delamination | |||||||||||
| Fa'atasi (200±2℃,10min) | 20±2℃ 10min | Leai se delamination, leai ni pulu, leai se resin liusuavai | |||||||||||
| Fa'avasegaga vevela |
| Vasega H (180℃) | |||||||||||
